25Ltr Carbon Remover Solvent Cleaner

Directions of Use

• Soak Method
• This method is an effective way of cleaning deposits from components and machine parts. In order to reduce the evaporation of Unitor™
• Carbon Remover™ both on the pure product as well as on its emulsions, a skin is formed when exposed to air.
• The items for cleaning are submerged into the active solvent. A wire basket can be used for small components. Immersion time will depend upon the nature of the
• deposits to be removed. Light deposits will be removed in 1 hour, whereas heavily oxidised deposits might need longer time.
• The components should be rinsed thoroughly before handling.

Cleaning the Oil Side of Heat Exchangers

• The Unitor™ Chemical Cleaning Unit - Product no. 572060- is recommended to be used.
• Isolate the oil supply, disconnect the heat exchanger oil inlet and outlet, drain off any remaining oil.
• Connect the discharge side of Unitor™ Chemical Cleaning Unit (CCU) to the lower heat exchanger connection and fit the return to the CCU.
• Add Unitor™ Carbon Remover™ to the drum, product can be diluted with diesel oil down to 25 % and heat, maintaining the temperature
• (max 50°C) throughout the
• cleaning operation. If heating is not available, the cleaning time will need to be extended and a higher product concentration is beneficial.
• Circulate for 12 hours. When the cleaning is complete, disconnect the lower heat exchanger connection and drain.
• Connect a high-pressure fresh water supply to the upper heat exchanger connection. Rinse until water runs clear.

Disconnect, drain and dry.

• Unitor™CarbonRemover™is a heavy duty solvent based cleaner ideal for removal of stubborn carbon deposits. Product Information
• Unitor™ Carbon Remover™ is a powerful non-corrosive solvent for quick break down carbon deposits and very economical in use.

Features

• Quickly dissolves deposits containing carbon, resins or varnishes

• Non flammable

• Removes carbon type deposits from burner tips, fuel injectors and all components fouled by carbon, resin or varnishes

• Cleans oil side of fuel heaters, oil coolers, etc.

• Removes carbon based deposits from fuel and lube oil filters

• Can be used for cleaning of: - Pistons - Piston rings - Valve cages

Benefits

• Simple and economical to use

• Eliminates the need for hard scraping